| SIMmelt NiBas20G |
Repairs of glass moulds in general, allowing - thanks to its moderate hardness - an excellent machinability.NiCuSiB powder. Coating Hardness: ~ 20 HRC |
- |
- |
- |
- |
| SIMmelt NiBas30G |
Protection and repairing of glass moulds, NiCrBSi with addition of fluxing elements. Coating hardness: ~30 HRC |
- |
- |
Ni-SF30 - 106/20 |
- |
| SIMmelt NiBas40 |
NiCrBSi powder, good resistance to corrosion and wear even at high operating temperatures, drawing dies, forging dies, tools in the plastics industry, ejector pins. Coating hardness: 40 HRC |
- |
- |
Ni-SF40 - 106/20 |
- |
| SIMmelt NiBas60 |
NiCrBSi powder, good resistance to corrosion and wear even at high operating temperatures, pump rings, friction bearing surfaces, knife edges, press moulds. Coating Hardness: 60 HRC |
- |
- |
Ni-SF60 - 106/20 |
- |
| SIMmelt NiBasW35 |
High level of protection against abrasive wear, slicing machine blades, conveyor chains, kneader parts.Nickel matrix with 35% tungsten carbides. Coating Hardness: Matrix 60 HRC |
- |
- |
WSC / Ni-SF - 106/20 |
|
| SIMmelt NiBasW55 |
Highest abrasion resistance, mixer-settler parts and kneaders in the ceramics industry, die drawing tools, chopping blades, scrapers.Nickel matrix with 55% tungsten carbides. Coating Hardness: Matrix 60 HRC |
- |
- |
WSC / Ni-SF - 106/20 |
|
| SIMmelt NiBasW60 |
Highest abrasion resistance, well suitable for automated spraying processes, separator screws, mixing shovels.Nickel matrix with 60% tungsten carbides. Coating Hardness Matrix 60 HRC |
- |
- |
WSC / Ni-SF - 106/20 |
|
| SUBmelt NiBas40 |
NiCrBSi powder, good resistance to oxidation, heat and corrosion, medium hard deposit with good resistance against metal-to-metal wear. Coating Hardness: 40 HRC |
- |
- |
Ni-SF40 - 125/45 |
|
| SUBmelt NiBasW50 |
For stirrer, mixing and fan blades, conveyer screw edges and parts subjected to abrasive wear.Nickel matrix with 50% tungsten carbides. Coating Hardness: Matrix 60 HRC |
- |
- |
WSC / Ni-SF - 125/45 |
- |
| SUBmelt NiBas60 |
NiCrBSi powder, highest abrasion resistance, stirrer, mixing shovels, screw shafts,for automatic spray processes. Coating Hardness: Matrix 60 HRC up to 63 HRC |
- |
- |
Ni-SF60 - 125/45 |
- |
| COLDmelt CuAl |
Copper-aluminium powder, good sliding and emergency running properties, rollers, bearing journals, slideways. Coating hardness: 130 HB |
- |
- |
CuAl 90 10 - 120/36 |
|
| COLDmelt Base17 |
NiAl5 powder, bond coat, base powder for initial layer under further coats of wear resistant CrNi- and Cu-alloys. Coating Hardness: appr. 150 - 190 HB |
- |
- |
NiAl 95 5 - 106/36 |
|
| COLDmelt Zn |
Zinc powder, active corrosion protection on steel under a ospheric stresses. Coating Hardness: 23 HB |
- |
- |
Zn - 125 |
|
| PLASweld FerroV1 |
Due to its high hardness, the powder for laser surfacing is suitable for build-ups on machine parts and tools subject to abrasion, compression and impact. Hardness of the weld deposit: 50 -60 HRC |
- |
- |
- |
|
| PLASweld FerroV15 |
Ferrous powder alloy for plasma arc surfacing with high Vanadium and Chromium content against a combination of wear and corrosion. Cutting tools, scraper. Hardness of the weld deposit: 58 - 64 HRC |
- |
- |
- |
|
| PLASweld NiBasW60 |
Powder blend for plasma arc surfacing, special nickel base matrix for highest abrasion stressess, for excavator parts, drilling tools, screws in the plastic industry and mining. Hardness of the weld deposit: approx. 55 HRC |
- |
- |
P Z Ni20 |
|
| PLASweld NiBas776W40 |
NiCrMo-powder with addition of tungsten carbides for PTA welding and laser surfacing, hardfacing weld overlays subject to corrosion and abrasive wear. Hardness of the weld deposit: Matrix approx. 510HV0,5 |
- |
- |
P Z Ni20 |
|
| PLASweld Celsit706 |
Cobalt alloy 6 for plasma- transferred-arc (PTA) and laser welding. Hardness of the weld deposit: approx. 41 HRC |
- |
- |
P Z Co2 |
|
| PLASweld Celsit712 |
Cobalt alloy 12 for plasma- transferred-arc (PTA) and laser welding. Hardness of the weld deposit: approx 48 HRC |
- |
- |
P Z Co3 |
|
| PLASweld Celsit721 |
Cobalt alloy 21 for plasma- transferred-arc (PTA) and laser welding. Hardness of the weld depositg approx. 32 HRC |
- |
- |
P Z Co1 |
|
| PLASweld Ferro39 |
Ferreous powder for laser and plasma arc surfacing, combining high strength, toughness and temperature resistance up to 550°C. Applicable on hot and cold work steels. Coating hardness: 38 - 42 HRC |
- |
- |
P Z Fe3 |
|
| PLASweld Ferro44 |
Ferreous powder for laser surfacing was especially developed for tough and crack resistant build-ups on high-strength nodular iron. Coating hardness: 44 HRC |
- |
- |
P Z Fe3 |
|
| PLASweld Ferro45 |
Ferreous powder for laser and plasma arc surfacing, combining high strength, toughness and temperature resistance up to 550°C. Applicable on hot and cold work steels. Coating hardness: 42 - 46 HRC |
- |
- |
P Z Fe3 |
|
| PLASweld Ferro55 |
Ferreous powder for laser and plasma arc surfacing, combining high strength, toughness and temperature resistance up to 550°C. Applicable on hot and cold work steels. Coating Hardness: 53 - 58 HRC |
- |
- |
P Z Fe8 |
|
| PLASweld NiBas068HH |
Corrosion resistant NiCrFe-powder for laser and plasma arc surfacing. Buffer layer preferred for stellite qualities, corrosion-resistant, pressure vessel construction, petrochemical industry. Hardness of the weld deposit: 180 HV |
- |
- |
- |
|
| PLASweld NiBas6222Mo |
Highly corrosion-resistant NiCrMo- powder for PTA surfacing, similar corrosion and temperature resistant alloys and for surfacing on mild steels. |
- |
- |
- |
|
| PLASweld Stainless18 |
Gas-atomized metal powder of the type 316L designed for laser and plasma arc surfacing. Good corrosion resistance. Hardness of the weld deposit: 160 - 200 HV |
- |
- |
14700P Z Fe12 |
|
