Monday - Friday 8AM - 5PM
Saturday 8AM - 1AM
Saturday 8AM - 1AM
Al Barsha 1 - Dubai
Sajaa Sharjah
Sajaa Sharjah
| Capacity | Thickness | Cut speed |
|---|---|---|
| Recommended | 25 mm (1″) 32 mm (1-1/4″) | 500 mm/min (20 ipm) 250 mm/min (10 ipm) |
| Severance (hand cutting) | 38 mm (1-1/2″) | 125 mm/min (5 ipm) |
| Pierce* | 20 mm (3/4″) | - |
| Capacity | Metal removal rate | Gouge profile |
|---|---|---|
| Typical gouge | 8.2 kg (18.2 lbs.) per hour | 3.5 mm D x 6.6 mm W (0.14″ D x 0.26″ W) |
| Title | Description |
|---|---|
| Input voltages | 200–480 V, 1-PH, 50/60 Hz 200–600 V, 3-PH, 50/60 Hz |
| Kilowatt output | 12.2 kW |
| Input current | 200/208/240/480, 1-PH 70/68/58/29 A @ 12.2 kW 200/208/240/480/600 V, 3-PH 42/40/35/18/17 A @ 12.2 KW |
| Output current | 25–85 A |
| Rated output voltage | 143 VDC |
| Duty cycle @ 104° F | 60% @ 85 A, 230–600 V, 3-PH 60% @ 85 A, 480 V, 1-PH 50% @ 85 A 240 V, 1-PH 50% @ 85 A, 200–208 V, 3-PH 40% @ 85 A, 200–208 V, 1-PH 100% @ 66 A, 230–600 V, 1/3-PH |
| Open circuit voltage (OCV) | 305 VDC |
| Dimensions with handles | 483 mm D; 233 mm W; 430 mm H (19″ D; 9.2″ W; 17″ H) |
| Weight w/7.6 m (25′) torch | 32 kg (67 lbs.) |
| Gas Supply | Clean, dry, oil-free air or nitrogen |
| Optimum inlet gas pressure | 7.6–8.3 bar (110–120 psi) |
| Minimum inlet gas pressure | 5.2 bar (75 psi) |
| Recommended inlet gas flow rate | Cutting: 210 I/min @ 5.9 bar (450 scfh, 7.5 scfm @ 85 psi) Gouging: 210 I/min @ 4.8 bar (450 scfh, 7.5 scfm @ 70 psi) |
| Input power cable length | 3 m (10′) |
| Power supply type | Inverter–IGBT |
| Engine drive requirement | 20 kW for full 85 A output |
| Certifications | CSA-certified for use in the Americas and Asia, except China |
| Warranty | Power supplies have a 3-year warranty and torches a 1-year warranty |
| Data Sheet |  |
