AccuLock R Consumables

Less downtime. Less troubleshooting. 7,150 gray hairs avoided (roughly).

As you work to meet cost and productivity expectations, you want to choose consumables that are easy for your operators to use so you can spend more time focusing on achieving your throughput, cost reduction and weld quality goals.

Tregaskiss® AccuLock™ R consumables virtually eliminate cross-threading, increase uptime, and reduce troubleshooting in robotic welding applications. The longer lifespan of AccuLock™ contact tips means fewer human interactions within your welding cells and fewer accidental errors.

When users upgrade from a copper tip to AccuLock HDP contact tips they can increase contact tip life up to 10x longer depending on the pulse welding application. In most cases, your current tip and diffuser can be replaced with no impact to Tool Center Point (TCP).

Overview

Contact Tips

Nozzles

Liners

Maximize Performance

AccuLock contact tips last longer due to increased mass and 60% of the contact tip buried within the diffuser, away from the heat of the weld

When upgrading from a copper tip to AccuLock HDP contact tip can last 10x longer depending on the pulse welding application.

Mating tapers on both tip-to-diffuser and diffuser-to-neck connections provide good electrical conductivity

No change to TCP – easily upgrade from TOUGH LOCK® and other consumables without the need to reprogram

For use with front-loading QUICK LOAD® liners

Minimize Errors

Coarse thread on tip virtually eliminates risk of cross-threading during replacement

Long contact tip tail concentrically aligns the tip within the diffuser prior to thread engagement, ensuring quick, accurate replacement without cross-threading

Simplify Maintenance

QUICK LOAD® liners install from the front of the MIG gun 50% faster than rear-loading liners

No need to remove the gun from the feeder

Operators can change liners from a safe zone in robot cell

Direct replacement for TOUGH LOCK® contact tips and retaining heads with no impact on TCP

Simplify MIG welding inventory with a common contact tip. Tregaskiss AccuLock R and Bernard® AccuLock S consumables share a common contact tip

AccuLock Contact Tips; Copper

  
        Part Number
        Description
      
    T-A030CH
    0.030″ (0.8 mm); qty. 10
  
    T-A030CH-100
    0.030″ (0.8 mm); qty. 100
  
    T-A030CH-1000
    0.030″ (0.8 mm); qty. 1000
  
    T-A035CH
    0.035″ (0.9 mm); qty. 10
  
    T-A035CH-100
    0.035″ (0.9 mm); qty. 100
  
    T-A035CH-1000
    0.035″ (0.9 mm); qty. 1000
  
    T-A039CH
    0.039″ (1.0 mm); qty. 10
  
    T-A039CH-100
    0.039″ (1.0 mm); qty. 100
  
    T-A039CH-1000
    0.039″ (1.0 mm); qty. 1000
  
    T-A045CH
    0.045″ (1.2 mm); qty. 10
  
    T-A045CH-100
    0.045″ (1.2 mm); qty. 100
  
    T-A045CH-1000
    0.045″ (1.2 mm); qty. 1000
  
    T-A052CH
    0.052″ (1.3 mm); qty. 10
  
    T-A052CH-100
    0.052″ (1.3 mm); qty. 100
  
    T-A052CH-1000
    0.052″ (1.3 mm); qty. 1000
  
    T-A062CH
    1/16″ (1.6 mm); qty. 10
  
    T-A062CH-100
    1/16″ (1.6 mm); qty. 100
  
    T-A072CH
    0.070″ (1.8 mm); qty. 10
  
    T-A072CH-100
    0.070″ (1.8 mm); qty. 100
  
    T-A078CH
    5/64″ (2.0 mm); qty. 10
  
    T-A078CH-100
    5/64″ (2.0 mm); qty. 100
  
    T-A094CH
    3/32″ (2.4 mm); qty. 10
  
    T-A094CH-100
    3/32″ (2.4 mm); qty. 100

Part Number	Description
T-A030CH	0.030″ (0.8 mm); qty. 10
T-A030CH-100	0.030″ (0.8 mm); qty. 100
T-A030CH-1000	0.030″ (0.8 mm); qty. 1000
T-A035CH	0.035″ (0.9 mm); qty. 10
T-A035CH-100	0.035″ (0.9 mm); qty. 100
T-A035CH-1000	0.035″ (0.9 mm); qty. 1000
T-A039CH	0.039″ (1.0 mm); qty. 10
T-A039CH-100	0.039″ (1.0 mm); qty. 100
T-A039CH-1000	0.039″ (1.0 mm); qty. 1000
T-A045CH	0.045″ (1.2 mm); qty. 10
T-A045CH-100	0.045″ (1.2 mm); qty. 100
T-A045CH-1000	0.045″ (1.2 mm); qty. 1000
T-A052CH	0.052″ (1.3 mm); qty. 10
T-A052CH-100	0.052″ (1.3 mm); qty. 100
T-A052CH-1000	0.052″ (1.3 mm); qty. 1000
T-A062CH	1/16″ (1.6 mm); qty. 10
T-A062CH-100	1/16″ (1.6 mm); qty. 100
T-A072CH	0.070″ (1.8 mm); qty. 10
T-A072CH-100	0.070″ (1.8 mm); qty. 100
T-A078CH	5/64″ (2.0 mm); qty. 10
T-A078CH-100	5/64″ (2.0 mm); qty. 100
T-A094CH	3/32″ (2.4 mm); qty. 10
T-A094CH-100	3/32″ (2.4 mm); qty. 100

AccuLock Contact Tips; HDP (6-10x Longer Life)

  
        Part Number
        Description
      
        T-A035WH
        0.035″ (0.9 mm); qty. 10
      
        T-A035WH-100
        0.035″ (0.9 mm); qty. 100
      
        T-A039WH
        0.039″ (1.0 mm); qty. 10
      
        T-A039WH-100
        0.039″ (1.0 mm); qty. 100
      
        T-A045WH
        0.045″ (1.2 mm); qty. 10
      
        T-A045WH-100
        0.045″ (1.2 mm); qty. 100
      
        T-A052WH
        0.052″ (1.3 mm); qty. 10
      
        T-A052WH-100
        0.052″ (1.3 mm); qty. 100

Part Number	Description
T-A035WH	0.035″ (0.9 mm); qty. 10
T-A035WH-100	0.035″ (0.9 mm); qty. 100
T-A039WH	0.039″ (1.0 mm); qty. 10
T-A039WH-100	0.039″ (1.0 mm); qty. 100
T-A045WH	0.045″ (1.2 mm); qty. 10
T-A045WH-100	0.045″ (1.2 mm); qty. 100
T-A052WH	0.052″ (1.3 mm); qty. 10
T-A052WH-100	0.052″ (1.3 mm); qty. 100

AccuLock Contact Tips; Chrome Zirconium

  
        Part Number
        Description
      
        T-A030ZH
        0.030″ (0.8 mm); qty. 10
      
        T-A030ZH-100
        0.030″ (0.8 mm); qty. 100
      
        T-A035ZH
        0.035″ (0.9 mm); qty. 10
      
        T-A035ZH-100
        0.035″ (0.9 mm); qty. 100
      
        T-A039ZH
        0.039″ (1.0 mm); qty. 10
      
        T-A039ZH-100
        0.039″ (1.0 mm); qty. 100
      
        T-A045ZH
        0.045″ (1.2 mm); qty. 10
      
        T-A045ZH-100
        0.045″ (1.2 mm); qty. 100
      
        T-A052ZH
        0.052″ (1.3 mm); qty. 10
      
        T-A052ZH-100
        0.052″ (1.3 mm); qty. 100
      
        T-A062ZH
        1/16″ (1.6 mm); qty. 10
      
        T-A062ZH-100
        1/16″ (1.6 mm); qty. 100

Part Number	Description
T-A030ZH	0.030″ (0.8 mm); qty. 10
T-A030ZH-100	0.030″ (0.8 mm); qty. 100
T-A035ZH	0.035″ (0.9 mm); qty. 10
T-A035ZH-100	0.035″ (0.9 mm); qty. 100
T-A039ZH	0.039″ (1.0 mm); qty. 10
T-A039ZH-100	0.039″ (1.0 mm); qty. 100
T-A045ZH	0.045″ (1.2 mm); qty. 10
T-A045ZH-100	0.045″ (1.2 mm); qty. 100
T-A052ZH	0.052″ (1.3 mm); qty. 10
T-A052ZH-100	0.052″ (1.3 mm); qty. 100
T-A062ZH	1/16″ (1.6 mm); qty. 10
T-A062ZH-100	1/16″ (1.6 mm); qty. 100

Tregaskiss Nozzles

  
        Part Number
        Description
      
        401-14-62
        Thread-on, 5/8″ bore, 1/8″ recess, tapered, 1.062″ O.D., copper; qty. 10
      
        401-43-62
        Thread-on, 5/8″ bore, 1/8″ recess, tapered, 0.938″ O.D., copper; qty. 10
      
        401-18-62
        Thread-on, 5/8″ bore, 1/8″ stick-out, tapered, 0.938″ O.D., copper; qty. 10
      
        401-20-62
        Thread-on, 5/8″ bore, 1/8″ stick-out, tapered, 1.062″ O.D., copper; qty. 10
      
        401-30-62T
        Thread-on, 5/8″ bore, 1/8″ stick-out, bottleneck, 0.938″ O.D., brass; qty. 10
      
        401-6-62
        Slip-on, 5/8″ bore, 1/8″ recess, tapered, 1.062″ O.D., copper; qty. 10
      
        401-8-62
        Slip-on, 5/8″ bore, 1/8″ stick-out, tapered, 0.938″ O.D., copper; qty. 10
      
        401-4-62
        Slip-on, 5/8″ bore, 1/8″ recess, tapered, 0.938″ O.D., copper; qty. 10
      
        401-5-62
        Slip-on, 5/8″ bore, 1/4″ recess, tapered, 1.062″ O.D., copper; qty. 10
      
        401-48-62
        Slip-on, 5/8″ bore, flush, bottleneck, 1.062″ O.D., copper; qty. 10
      
        401-81-62
        Slip-on, 5/8″ bore, 1/8″ stick-out, tapered, 1.062″ O.D., copper; qty. 10
      
        401-7-62
        Slip-on, 5/8″ bore, 1/4″ recess, tapered, 1.106″ O.D., brass; qty. 10
      
        401-71-62
        Slip-on, 5/8″ bore, 1/8″ recess, tapered, 1.106″ O.D., brass; qty. 10
      
        401-87-62
        Slip-on, 5/8″ bore, 1/8″ stick-out, tapered, 1.062″ O.D., brass; qty. 10
      
        401-30-62
        Slip-on, 5/8″ bore, 1/8″ stick-out, bottleneck, 0.938″ O.D., brass; qty. 10

Part Number	Description
401-14-62	Thread-on, 5/8″ bore, 1/8″ recess, tapered, 1.062″ O.D., copper; qty. 10
401-43-62	Thread-on, 5/8″ bore, 1/8″ recess, tapered, 0.938″ O.D., copper; qty. 10
401-18-62	Thread-on, 5/8″ bore, 1/8″ stick-out, tapered, 0.938″ O.D., copper; qty. 10
401-20-62	Thread-on, 5/8″ bore, 1/8″ stick-out, tapered, 1.062″ O.D., copper; qty. 10
401-30-62T	Thread-on, 5/8″ bore, 1/8″ stick-out, bottleneck, 0.938″ O.D., brass; qty. 10
401-6-62	Slip-on, 5/8″ bore, 1/8″ recess, tapered, 1.062″ O.D., copper; qty. 10
401-8-62	Slip-on, 5/8″ bore, 1/8″ stick-out, tapered, 0.938″ O.D., copper; qty. 10
401-4-62	Slip-on, 5/8″ bore, 1/8″ recess, tapered, 0.938″ O.D., copper; qty. 10
401-5-62	Slip-on, 5/8″ bore, 1/4″ recess, tapered, 1.062″ O.D., copper; qty. 10
401-48-62	Slip-on, 5/8″ bore, flush, bottleneck, 1.062″ O.D., copper; qty. 10
401-81-62	Slip-on, 5/8″ bore, 1/8″ stick-out, tapered, 1.062″ O.D., copper; qty. 10
401-7-62	Slip-on, 5/8″ bore, 1/4″ recess, tapered, 1.106″ O.D., brass; qty. 10
401-71-62	Slip-on, 5/8″ bore, 1/8″ recess, tapered, 1.106″ O.D., brass; qty. 10
401-87-62	Slip-on, 5/8″ bore, 1/8″ stick-out, tapered, 1.062″ O.D., brass; qty. 10
401-30-62	Slip-on, 5/8″ bore, 1/8″ stick-out, bottleneck, 0.938″ O.D., brass; qty. 10

QUICK LOAD® Liners

  
        Part Number
        Description
      
        415-35-6Q
        For 0.035″-0.045″ wire, high carbon steel, round wound, 6 ft
      
        415-35-15Q
        For 0.035″-0.045″ wire, high carbon steel, round wound, 15 ft
      
        415-116-6Q
        For 0.045″-1/16″ wire, high carbon steel, round wound, 6 ft
      
        415-116-10Q
        For 0.045″-1/16″ wire, high carbon steel, round wound, 10 ft
      
        415-116-15Q
        For 0.045″-1/16″ wire, high carbon steel, round wound, 15 ft
      
        415-564-6Q
        For 1/16″-5/64″ wire, high carbon steel, round wound, 6 ft
      
        415-332-6Q
        For 0.078″-3/32″ wire, high carbon steel, round wound, 6 ft

Part Number	Description
415-35-6Q	For 0.035″-0.045″ wire, high carbon steel, round wound, 6 ft
415-35-15Q	For 0.035″-0.045″ wire, high carbon steel, round wound, 15 ft
415-116-6Q	For 0.045″-1/16″ wire, high carbon steel, round wound, 6 ft
415-116-10Q	For 0.045″-1/16″ wire, high carbon steel, round wound, 10 ft
415-116-15Q	For 0.045″-1/16″ wire, high carbon steel, round wound, 15 ft
415-564-6Q	For 1/16″-5/64″ wire, high carbon steel, round wound, 6 ft
415-332-6Q	For 0.078″-3/32″ wire, high carbon steel, round wound, 6 ft

QUICK LOAD E-Z Feed™ Liners for Cored Wire

  
        Part Number
        Description
      
        415-35-062Q
        For 0.035″-0.045″ wire, galvanized, D-wound (requires 415-26 retainer)
      
        415-116-062Q
        For 0.045″-1/16″ wire, galvanized, D-wound (requires 415-31 retainer)

Part Number	Description
415-35-062Q	For 0.035″-0.045″ wire, galvanized, D-wound (requires 415-26 retainer)
415-116-062Q	For 0.045″-1/16″ wire, galvanized, D-wound (requires 415-31 retainer)

QUICK LOAD Liner Retainers

  
        Part Number
        Description
      
        415-26
        QUICK LOAD liner retainer, for 0.030″-5/64″ wire
      
        415-31
        QUICK LOAD liner retainer, for 0.045″-1/16″ wire (required for 415-116-062Q)

Part Number	Description
415-26	QUICK LOAD liner retainer, for 0.030″-5/64″ wire
415-31	QUICK LOAD liner retainer, for 0.045″-1/16″ wire (required for 415-116-062Q)